The Effect of Chemical Composition on Mechanical Behavior Of Galvanized Coatings By Hot Dip: A Review
Main Article Content
Abstract
Keywords
ductility, galvanized, Fe-Zn-Al compounds. ductilidad, galvanizado, compuestos Fe-Zn-Al.
References
[2] A. R. Marder, “The metallurgy of zinc-coated steel”. Progress in Materials Science. Volume 45, pp. 191-271, 2000.
[3] L. Jintang, Ch. Chunshan, K. Gang, X. Qiaoyu, Ch. Jinhong. “Influence of silicon on the ?-Fe/? interface of hot-dip galvanized steels”. Surface & Coatings Technology. Volume 200, pp.5277-5281, 2006.
[4] G.K. Mandal, D. Mandal, S.K. Das, R. Balasubramaniam and S.P. Mehrotra. “Microstructural study of galvanized coatings formed in pure as well as commercial grade zinc baths”. Transactions of the Indian Institute of Metals. Volume 62, pp. 35-40, 2009.
[5] N. Pistofidis, G. Vourlias, S. Konidaris, E. Pavlidou, A. Stergiou, G. Stergioudis. “Microstructure of zinc hot-dip galvanized coatings used for corrosion protection”. Materials Letters. Volume 60, pp. 786-789, 2006.
[6] F. García, A. Salinas, E. Nava. “The role of Si and Ti additions on the formation of the alloy layer at the interface of hot-dip Al–Zn coatings on steel strips”. Materials Letters. Volume 60, pp. 775-778, 2006.
[7] ASM Metal Handbook. Alloy Phases diagrams. ASM International. U.S.A. 2002, pp. 335-336, 875-876.
[8] Rico Y, Hernández J. “Influencia de la velocidad de enfriamiento sobre la microestructura y comportamiento a la corrosión de recubrimientos Zn-7Al por inmersión en caliente sobre acero”. Rev. LatinAm. Metal. Mat. Volume 35, pp. 269-275, 2015.
[9] M. Manna, G. Naidu, N. Rani, N. Bandyopadhyay. “Characterization of coating on rebar surface using Hot-dip Zn and Zn-4.9Al-0.1 misch metal bath”. Surface and Coatings Technology. Volume 202, pp. 1510-1516, 2008.
[10] Y. Chen, Y. Liua, H. Tua, Ch. Wua, X. Sua, J. Wang. “Effect of Ti on the growth of the Fe–Al layer in a hot dipped Zn–6Al–3Mg coating”. Surface & Coatings Technology. Volume 275, pp. 90-97, 2015.
[11] F. Goodwin, R. Wright. “The Process Metallurgy of Zinc-Coated Steel Wire and Galfan® Bath Management”. Conference Proceedings- Wire Association International Incorporated. Pp. 135-139, USA, 2001.
[12] N. Coni, M. L. Gipiela, A. S. C. M. D’Oliveira, P. V. P. Marcondes. “Study of the Mechanical Properties of the Hot Dip Galvanized Steel and Galvalume®”. J. of the Braz. Soc. of Mech. Sci. & Eng. Volume XXXI, pp. 319-326, 2009.
[13] G. González, A. Pacheco. “Evaluación microestructural de recubrimientos de Zn-4Al, Zn-6Al y Zn-10Al sobre un acero SAE 1020 sometido a ensayos de tracción”. Acta Microscopica. Volume 19, pp. 78- 83, 2010.
[14] Norma ASTM E-290: “Standard Test Methods for Bend Testing of Material for Ductility, Annual Book of ASTM Standards, Vol 01.06, 2002.
[15] I. Roa. “Estudio del comportamiento mecánico ante deformaciones y vibraciones de recubrimientos de galvanizado obtenidos por inmersión en caliente en baños con contenidos variables de Níquel y Aluminio”. Tesis de grado. Universidad de Concepción Chile, 2004.
[16] E. Tzimas, G. Papadimitriou. “Cracking mechanisms in high temperature hot-dip galvanized coatings”. Surface and Coatings Technology. Volume 145, pp. 176-185, 2001.
[17] R. Parisot, S. Forest, A. Pineau, F. Grillon, X. Demonet, J. Mataign. “Deformation and Damage Mechanisms of Zinc Coatings on Hot-Dip Galvanized Steel Sheets: Part I. Deformation Modes”. Metallurgical and Materials Transactions. Volume 35, pp. 797-811, 2004.
[18] S. Ploypech, Y. Boonyongmaneerat, P. Jearanaisilawong. “Crack initiation and propagation of galvanized coatings hot-dipped at 450 °C under bending loads”. Surface & Coatings Technology. Volume 206, pp. 3758-376, 2012.