Implementation of a control system of voltage and frequency for an electrical power system of scale of the Universidad Politécnica Salesiana sede Cuenca
Article Sidebar
Main Article Content
Abstract
This paper presents the simulation and implementation of a PID controller by using the MATLAB and LabView software. The controlled process is an Electrical Power System scale, which is operating in the laboratories of the Universidad Politécnica Salesiana of Cuenca. The controller’s purpose described is to maintain fixed the values of frequency and voltage produced by a synchronous generator and a coupled three-phase motor by their shafts by a band, to various external agents disturbances such as load variation in the power grid.
Article Details
The Universidad Politécnica Salesiana of Ecuador preserves the copyrights of the published works and will favor the reuse of the works. The works are published in the electronic edition of the journal under a Creative Commons Attribution/Noncommercial-No Derivative Works 4.0 Ecuador license: they can be copied, used, disseminated, transmitted and publicly displayed.
The undersigned author partially transfers the copyrights of this work to the Universidad Politécnica Salesiana of Ecuador for printed editions.
It is also stated that they have respected the ethical principles of research and are free from any conflict of interest. The author(s) certify that this work has not been published, nor is it under consideration for publication in any other journal or editorial work.
The author (s) are responsible for their content and have contributed to the conception, design and completion of the work, analysis and interpretation of data, and to have participated in the writing of the text and its revisions, as well as in the approval of the version which is finally referred to as an attachment.
References
[2] A. Robles and I. Fernández, “Centrales de generación de energía eléctrica,” Universidad de Cantabria, pp. 6–7, 2012.
[3] B. Kuo, Sistemas de control automático. Prentice Hall Hispanoamericana, 1996.
[4] M. Álvarez and J. González, “Diseño e implementación de un sistema de control de velocidad y voltaje utilizando Matlab,” Escuela Superior
Politécnica del Litoral, 2005.
[5] M. A. Ashley-Ross and G. V. Lauder, “Diseño e implementación de un sistema de control de velocidad y voltaje para la unidad 4 de generación de la central termoeléctrica Guangopolo,” Universidad de las Fuerzas Armadas ESPE, 2013.
[6] M. Álvarez, J. González, and J. D. Pozo, “Diseño e implementación de un sistema de control de frecuencia y voltaje,” Revista Tecnológica ESPOL, vol. 20, pp. 47–55, 2007.
[7] J. Bernal and M. Sánchez, “Construcción de un sistema de control de voltaje y frecuencia del generador síncrono Siemens, DM-SN/DG2240.Q4-R3 del laboratorio de máquinas eléctricas de la UPS, sede Cuenca,” Universidad Politécnica Salesiana, 2010.