Influence of the Zinc Chromate coating on the corrosion of ASTM A-500 and galvanized A-500 steel exposed into a salt fog corrosion chamber
Main Article Content
Abstract
Keywords
ASTM-500, anticorrosive coatings, salt spray corrosion chamber ASTM-500, recubrimientos anticorrosivos, cámara de niebla salina
References
[2] K. B. Yu., G. Stradanchenko S., S. A. Yu., S. Garmider A., and B. Kalmykova Yu., “Effect of the bus bodywork on impact strength properties in roll-over,” ARPN Journal of Engineering and Applied Sciences, vol. 11, no. 17, pp. 10 205–10 208, 2016. [Online]. Available: https://bit.ly/3vsZf5F
[3] C. Cui, A. T. O. Lim, and J. Huang, “A cautionary note on graphene anti-corrosion coatings,” Nature Nanotechnology, vol. 12, no. 9, pp. 834–835, Sep. 2017. [Online]. Available: https://doi.org/10.1038/nnano.2017.187
[4] K. K. Toledo, H.-S. Kim, Y.-S. Jeong, and I.-T. Kim, “Residual compressive strength of short tubular steel columns with artificially fabricated local corrosion damage,” Materials, vol. 13, no. 4, 2020. [Online]. Available: https://doi.org/10.3390/ma13040813
[5] V. N. Tseluikin and A. A. Koreshkova, “Corrosion resistance of composite coatings based on zinc,” Chemical and Petroleum Engineering, vol. 52, no. 7, pp. 560–562, Nov. 2016. [Online]. Available: https://doi.org/10.1007/s10556-016-0232-3
[6] Q. Li, H. Lu, J. Cui, M. An, and D. Li, “Electrodeposition of nanocrystalline zinc on steel for enhanced resistance to corrosive wear,” Surface and Coatings Technology, vol. 304, pp. 567–573, 2016. [Online]. Available: https://doi.org/10.1016/j.surfcoat.2016.07.056
[7] H. Kania, M. Saternus, J. Kudláçek, and J. Svoboda, “Microstructure characterization and corrosion resistance of zinc coating obtained in a zn-alnibi galvanizing bath,” Coatings, vol. 10, no. 8, 2020. [Online]. Available: https://doi.org/10.3390/coatings10080758
[8] R. Vera, E. Cruz, M. Bagnara, R. Araya, R. Henríquez, A. Díaz-Gómez, and P. Rojas, “Evaluation of anticorrosive coatings on carbon steel in marine environments: Accelerated corrosion test and field exposure,” International Journal of Electrochemical Science, vol. 13, pp. 898–914, 2018. [Online]. Available: https://doi.org/10.20964/2018.01.66
[9] I. Stojanovic, A. Farkas, V. Alar, and N. Degiuli, “Evaluation of the corrosion protection of two underwater coating systems in a simulated marine environment,” Advances in Surface Engineering, vol. 71, no. 12, pp. 4330–4338, Dec. 2019. [Online]. Available: https://doi.org/10.1007/s11837-019-03669-4
[10] K. Goyal, H. Singh, and R. Bhatia, “Hot-corrosion behavior of Cr2O3-CNT-coated ASTM-SA213-T22 steel in a molten salt environment at 700circC,” International Journal of Minerals, Metallurgy, and Materials, vol. 26, no. 3, pp. 337–344, Mar. 2019. [Online]. Available: https://doi.org/10.1007/s12613-019-1742-8
[11] SSPC, “Sspc-sp-3, surface preparation specification: Power tool cleaining,” The Society for Protective Coatings, Tech. Rep., 2003. [Online]. Available: https://bit.ly/3u4JX6Z
[12] ——, “Sspc-sp-5, white metal blast cleaning,” The Society for Protective Coatings, Tech. Rep., 1999. [Online]. Available: https://bit.ly/3e3L2q1
[13] ASTM, “Astm b117 - 19 standard practice for operating salt spray (fog) apparatus,” ASTM International, West Conshohocken, PA, Tech. Rep., 2019. [Online]. Available: http://doi.org/10.1520/B0117-19
[14] ——, “Astm g1 - 03(2017)e1 standard practice for preparing, cleaning, and evaluating corrosion test specimens,” ASTM International, West Conshohocken, PA, Tech. Rep., 2017. [Online]. Available: http://doi.org/10.1520/G0001-03R17E01
[15] ——, “Astm d610 - 08(2019) standard practice for evaluating degree of rusting on painted steel surfaces,” ASTM International, West Conshohocken, PA, Tech. Rep., 2019. [Online]. Available: http://doi.org/10.1520/D0610-08R19
[16] ——, “Astm d714 - 02(2017) standard test method for evaluating degree of blistering of paints,” ASTM International, West Conshohocken, PA, Tech. Rep., 2017. [Online]. Available: http://doi.org/10.1520/D0714-02R17