Mechanical Flexural Characterization of Composite Materials with Photopolymer Matrix Reinforced with Abaca and Cabuya Fibers Using 3D Printing
Main Article Content
Abstract
Keywords
composite materials, 3D printing, abaca fibers, cabuya fibers, photopolymer matrix materiales compuestos, impresión 3D, fibras de abacá, fibras de cabuya, matriz fotopolimérica
References
[2] K. Quesada-Solís, P. Alvarado-Aguilar, R. Sibaja-Ballestero, and J. Vega-Baudrit, “Utilización de las fibras del rastrojo de piña (Ananas comusus, variedad champaka) como material de refuerzo en resinas de poliéster,” Revista Iberoamericana de Polímeros, vol. 6, no. 2, pp. 157–179, 2005. [Online]. Available: http://bit.ly/2J8ddTT
[3] O. Faruk, A. K. Bledzki, H.-P. Fink, and M. Sain, “Progress report on natural fiber reinforced composites,” Macromolecular Materials and Engineering, vol. 299, no. 1, pp. 9–26, 2014. [Online]. Available: https://doi.org/10.1002/mame.201300008
[4] F. Ahmad, H. S. Choi, and M. K. Park, “A review: Natural fiber composites selection in view of mechanical, light weight, and economic properties,” Macromolecular Materials and Engineering, vol. 300, no. 1, pp. 10–24, 2015. [Online]. Available: https://doi.org/10.1002/mame.201400089
[5] K. N. Roshdestwensky, J. L. Mroginski, C. A. Morel, R. B. D’Ambra, and J. M. Podestá, “Modelado numérico del comportamiento de la interface en materiales compuestos,” Asociación Argentina de Mecánica Computacional, vol. 32, no. 19, pp. 1653–1670, 2013. [Online]. Available: http://bit.ly/2KEWMSr
[6] N. Guo and M. C. Leu, “Additive manufacturing: technology, applications and research needs,” Frontiers of Mechanical Engineering, vol. 8, no. 3, pp. 215–243, 2013. [Online]. Available: https://doi.org/10.1007/s11465-013-0248-8
[7] P. C. Li and S. C. Huang, “Application of rapid prototyping technology in automobile manufacturing industry,” in Modern Tendencies in Engineering ciences, ser. Applied Mechanics and Materials, vol. 533. Trans Tech Publications Ltd, 5 2014, pp. 106–110. [Online]. Available: https://doi.org/10.4028/www.scientific.net/AMM.533.106
[8] M. Berchon and B. Luyt, La impresión 3D. Guía definitiva para makers, diseñadores, estudiantes, profesionales, artistas y manitas en general. Editorial Gustavo Gili, 2016. [Online]. Available: http://bit.ly/2YcsNEp
[9] J. Bonada, A. Muguruza, X. Fernández-Francos, and X. Ramis, “Influence of exposure time on mechanical properties and photocuring conversion ratios for photosensitive materials used in additive manufacturing,” Procedia Manufacturing, vol. 13, pp. 762–769, 2017. [Online]. Available: https://doi.org/10.1016/j.promfg.2017.09.182
[10] Stratasys. (2017) Make it more realistic and accurate with polyjet. Stratasys Ltd. [Online]. Available: http://bit.ly/31VRQhq
[11] W. Callister, Introducción a la Ciencia e Ingeniería de los Materiales. Editorial Reverté. S. A., 2007. [Online]. Available: http://bit.ly/2XuZ4JF
[12] P. Pontón and V. H. Guerrero, “Obtención de materiales compuestos de matriz poliéster reforzados con fibra de abacá mediante estratificación manual,” Revista Tecnológica ESPOL, vol. 23, no. 3, pp. 47–54, 2010. [Online]. Available: http://bit.ly/2ZLLPSw
[13] J. G. Paredes Salinas and A. D. Jácome León, Estudio de la configuración de fibras del material compuesto de matriz epoxi reforzada con fibra de piña y su incidencia en las propiedades mecánicas en la fabricación de butacas deportivas. Tesis de Grado, Universidad Técnica de Ambato, 2015. [Online]. Available: http://bit.ly/2X0ZKCf [14] J. Summerscales, A. S. Virk, and W. Hall, “Enhanced rules-of-mixture for natural fibre reinforced polymer matrix (nfrp) composites (comment on lau et al. in volume 136),” Composites Part B: Engineering, vol. 160, pp. 167–169, 2019. [Online]. Available: https://doi.org/10.1016/j.compositesb.2018.10.021
[15] D. S. Ponce and V. Guerrero, “Propiedades mecánicas de compuestos biodegradables elaborados a base de ácido poliláctico reforzados con fibra de abacá,” Revista Politécnica, vol. 33, no. 2, 2014. [Online]. Available: http://bit.ly/2X12KhZ
[16] J. C. Rocha-Hoyos, E. A. Llanes-Cedeño, S. F. Celi-Ortega, and D. C. Peralta-Zurita, “Efecto de la adición de biodiésel en el rendimiento y la opacidad de un motor diésel,” Información tecnológica, vol. 30, pp. 137–146, 06 2019. [Online]. Available: http://bit.ly/2XzptpO
[17] N. A. Tamayo Duque, Obtención y caracterización de materiales compuestos de matriz poliéster reforzados con fibra de cabuya mediante estratificación. Tesis de Grado, Escuela Politécnica Nacional, 2012. [Online]. Available: http://bit.ly/2NnLNPA